Alinco DR-135T VHF FM Mobile Transceiver
MPN: DR-135T
This item has been discontinued. No longer available.
Get notified when this product is back in stock
- Description
- Additional information
- Specification
- Package Includes
- Product Guides & Documentation
- Accessories
Features of DR-135T
- 50 watts, H/M/L power settings
- 100 memory channels
- Front panel data port
- Rear panel DSUB9 computer connection
- No need to remove mic for packet operation
- Ignition key on/off feature
- CTCSS, DCS encode+decode, DTMF encode and Tone-burst are all standards
- Clean, clear Alinco audio
- Super-wide 7 character alphanumeric display
- Wide and narrow FM modes (16K0 & 8K50F3E)
- Theft alarm feature
- A large, palm-fitting commercial-grade backlit microphone with a metal connector (not a modular plug) as well as direct frequency input and direct multi-function access such as monitor, call channel, power setting, memory to VFO plus more!
- Stays in mode you select (voice/packet) through
power off cycles - Ten autodial memories
- and more….at Low Alinco price!
| Weight | 4.51 lbs |
|---|---|
| Dimensions | 13.5 × 2.5 × 8.25 in |
| Brand | Alinco |
Specification
|
DR-135T General Specs
|
|||||||
|
Frequency range
|
|
||||||
|
Operating mode
|
16K0F3E (FM)/8K50F3E (Narrow-FM)
F1(9600bps)/F2(1200bps)/10F3 * 1 /A3E (RX only DR135TMkII) |
||||||
|
Channel steps
|
5, 8.33, 10, 12.5, 15, 20, 25, 30, 50 KHz
|
||||||
|
Memory channel
|
100 channels + 1 quick recall (CALL)
|
||||||
|
Antenna impedance
|
50ohm unbalanced
|
||||||
|
Frequency stability
|
+/- 2.5ppm TCXO
|
||||||
|
Power supply requirement
|
13.8V DC +/- 15% negative ground
|
||||||
|
Current drain
|
Approx. 11.0A TX High
Approx. 0.4A squelched |
||||||
|
Usable temperature range
|
-10 – +60c (14 – 140F)
|
||||||
|
Dimensions (w/o projection)
|
142(W) x 40(H) x 174(D) mm
5.59″(W) x 1.57″(H) x 6.85″(D) |
||||||
|
Weight
|
Approx. 1.0Kg (35.3oz)
|
||||||
|
CTCSS tone
|
encoder/decoder 39 tones
|
||||||
|
Digital Coded Squelch
|
encoder/decoder 104 codes
|
||||||
|
DR-135T Transmitter Specs
|
|||||||
|
Output power
|
Approx. 50W (HI)
Approx. 20W (MID) Approx. 5W (LOW) |
||||||
|
Modulation system
|
Variable reactance frequency modulation
|
||||||
|
Spurious emission
|
Less than -60 dB
|
||||||
|
Maximum frequency deviation
|
+/- 5 KHz (FM) / +/- 2.5 KHz (NFM)
|
||||||
|
DR-135T Receiver Specs
|
|||||||
|
Receive system
|
Double-conversion superheterodyne
|
||||||
|
Sensitivity (-12dB SINAD) *2
|
Less than -16.0dBu
|
||||||
|
Intermediate frequency
|
1st IF 21.7 MHz, 2nd IF 450 KHz
|
||||||
|
Selectivity *2
|
-6dB: 12KHz or more
-60dB: 28KHz or less (FM) -6dB: 6KHz or more -60dB: 16KHz or less (NFM) |
||||||
|
Audio output power
|
More than 2W(8ohm 10%THD)
|
||||||
|
Note:
|
* 1 Optional units required
* 2 Typical within the amateur radio band(s |
||||||
Package Includes
In the Box:
- DR-135T
- Microphone
- DC power cable with fuse holder
- Mobile mounting bracket
- Hardware kit for
- Alarm cable A (with wire)
- Alarm cable B (extension use)
- Theft alarm stickers
- Instruction Manual
